If your established plant group fills a 120cm tent, a 150cm enclosure can look like a simple upgrade. The extra width may make spreading plants easier to arrange, but the move also changes how far you reach, where the light falls and how extraction connects. Buying a larger shell is only the first part of the decision.
TheOneGrow offers 120 × 120 × 200cm and 150 × 150 × 200cm indoor tents. Both are 200cm tall, so the larger choice adds floor space without adding headroom. That makes the 150cm option worth comparing for a genuinely wider mature plant group, rather than for a height problem the new tent does not solve.
This guide helps South African growers plan the move from 120cm to 150cm. Compare floor area, maintenance access, lighting and extraction, then choose an enclosure or ventilation kit around your existing equipment.

Does the extra width solve the problem you have?
Choose the 150cm tent when the mature plant arrangement needs more width and depth. Keep the 120cm tent when the plants already fit and your real difficulty is restricted access outside the tent, an unsuitable lamp position or inadequate height.
| Comparison | TheOneGrow 120cm tent | TheOneGrow 150cm tent | What changes? |
|---|---|---|---|
| Floor dimensions | 120 × 120cm | 150 × 150cm | 30cm more along each side |
| Nominal floor area | 1.44m² | 2.25m² | 0.81m² more, or 56.25% |
| Total height | 200cm | 200cm | No additional vertical space |
| Published frame rating | 25kg | 25kg | No increase in the stated suspended-load allowance |
| Product choice | Enclosure and frame | Enclosure and frame | Lighting and ventilation selected separately |

The calculation is 1.2 × 1.2 and 1.5 × 1.5. The percentage describes floor area, without guaranteeing extra plants, harvest or usable lighting.
Imagine a group of peppers that needs more spacing as branches spread. The 150cm enclosure can make that layout less crowded. However, if the problem is that tall tomato plants leave no room to raise the lamp, these two tents have the same height. A wider floor does not give that lamp another 30cm of vertical movement.
Both product pages list 600D Oxford fabric, reflective lining and a 16mm steel frame. Buy the larger size for useful space, rather than expecting the change in width to provide a stronger load rating. Add up the equipment you plan to suspend and follow the relevant support instructions.
Can you still reach the plants at the back?
Mark both footprints on the room floor before moving equipment. Then leave the furniture where it normally belongs and rehearse opening the tent and reaching the rear pots.
Consider an illustrative 2.4m-wide room. A 120cm tent leaves 1.2m of width beside its footprint; a 150cm tent leaves 0.9m. Those figures do not establish a legal or universally comfortable aisle. They show how the larger enclosure consumes another 30cm outside the plants as well.
Test three ordinary jobs:
- Watering: can you reach the back container without leaning on the front plant or pulling its support?
- Removal: can a tray, reservoir lid or damaged plant come out through the door along a clear route?
- Adjustment: can you reach the light hangers and extraction components after the plants have grown?
If access is only from the front, adding depth makes the rear of the arrangement farther away. Do not fill every part of the new floor automatically. A removable row or deliberately retained gap can be more useful than another tightly packed container.
The TheOneGrow product descriptions identify front access, a viewing window and a tool pocket. A viewing window lets you observe plants; it is not another opening through which you can water the rear pots. Plan around actual access rather than imagining side doors from a generic tent photograph.
Use the tent selection guide for the broader room-layout decision.
Which existing equipment can you retain?
Retain equipment that still performs its job in the revised plant area. There is no need to replace everything because the shell is larger, but moving the same lamp to the centre does not automatically illuminate the additional space adequately.
Lighting: compare the new plant positions with the fixture's recommended arrangement and light distribution. The same total light spread across a larger occupied area can leave less available per unit area. You can initially keep the existing illuminated plant zone inside the bigger tent instead of planting into every corner immediately.
If the objective is to use the full wider area for higher-light crops, choose lighting for that area before ordering the expansion. Physical fit only tells you the fixture can go inside; it does not establish the light received at the outer plants. Preserve space above plants for mounting and the recommended lamp distance.
Extraction: keep a usable fan when its installed performance and connections suit the new route. The 120cm product's size guide lists six-inch compatibility; the 150cm guide lists six- or eight-inch compatibility. That describes connection choices, not a guarantee that any fan of those diameters meets every heat and moisture load.
Both tents have the same height, but nominal internal volume rises from 2.88m³ to 4.50m³. Actual extraction requirements also depend on lighting, plants, filter resistance and the intake room. Avoid buying a larger motor solely by multiplying the old fan rating by the floor-area ratio.
Internal circulation: revisit fan direction and mounting clearance. Wider spacing or an added row can interrupt the stream that worked before. Adjust position first, then add another fan if a distinct area remains poorly served.
Buy the larger shell or choose the ventilation kit?
Choose the enclosure-only route when the existing lighting and extraction can be retained. That puts the purchase into the extra space while avoiding duplicate components.
TheOneGrow's 150cm ventilation kit is another route when you need an enclosure and matching six-inch extraction items together. It lists an inline fan, carbon filter, ducting, three clamps and hanging rope, plus nine planting bags and a 100 × 100cm trellis net. Choose lighting separately.
The number of supplied bags is a package count, not a promise that nine mature plants will fit comfortably. Place containers according to the crop and care access. Likewise, the 100cm net is smaller than the 150cm floor and should not be mistaken for a full-width support system.
Use a retain-or-replace list:
- Keep the existing lamp if the intended occupied area remains suitable.
- Keep extraction parts that match and still perform the required job.
- Replace damaged or incompatible connections, not every accessory by default.
- Choose the 150cm ventilation kit if its extraction package replaces equipment you genuinely need.
After moving, run the finished system and record plant-level conditions before expanding into the new corners. That separates a successful equipment move from a larger planting decision.
Conclusion
For South African growers whose mature plants need more floor space, TheOneGrow's 150 × 150 × 200cm tent adds 0.81m² while letting suitable equipment be retained. Choose it when the room still allows care and the lighting suits the occupied area. Keep 120cm when it already serves the crop, or when the unresolved problem is height rather than width.
Frequently asked questions
These questions focus on the consequences of upgrading an existing setup rather than choosing a first tent.
How big should my grow tent be?
Allow for the mature plant arrangement, equipment and everyday access. For this upgrade, compare a marked 120cm and 150cm footprint with the same room furniture. Select the larger size for space you can use and maintain, rather than because it barely fits between walls.
Is a larger tent worth making the room cramped?
Only when the added growing space remains practical. If you cannot water, remove containers or reach equipment conveniently, retain the smaller tent or revise the position. A wider enclosure can improve plant spacing while simultaneously reducing the room's working space.
Do I gain more height or hanging capacity with 150cm?
Not in these two TheOneGrow choices. Both list 200cm total height and a 25kg frame load rating. Follow the hanging instructions and distribute equipment appropriately. A larger footprint does not increase the published rating or solve inadequate lamp headroom.
Must I replace the light immediately?
No, if you retain a plant area that the existing light serves adequately. Reassess lighting when expanding the occupied canopy into the additional floor area. Moving the same fixture into a larger enclosure is not proof that it provides adequate light at every new plant position.
